Two engines shed themselves over two towns on the same afternoon
On 20 February 2021, two widebodies lost engine parts over inhabited ground within hours of each other.
At Maastricht, Longtail Aviation flight 5504, a Boeing 747-400 freighter bound for New York, suffered a failure of the number one engine — the outboard left Pratt & Whitney PW4056 — shortly after departure. Turbine blades fell across the village of Meerssen, one to two nautical miles beyond the runway end. Two people on the ground were injured and there was damage to buildings and cars. The aircraft shut the engine down and diverted to Liège. The Dutch Safety Board opened an investigation; a separate criminal negligence investigation was opened and closed a month later without a finding.
At Denver the same day, United flight 328, a Boeing 777-200 with a PW4000, suffered a fan blade failure after take-off and scattered a cowling and engine debris across Broomfield, Colorado. Nobody on the ground was hurt, which was luck rather than design.
Neither is a FOD event in the sense this site normally uses the term. Both are the same event with the arrow reversed: an aircraft producing debris rather than ingesting it. Which is worth writing down, because this industry spends its money almost entirely on one direction of that arrow.
The runway is watched. Detection systems scan it continuously, inspections walk it, and a bolt lying on the surface at a major airport has a reasonable chance of being found. The ground under the departure path is watched by nobody at all, and the objects arriving there are not bolts — they are turbine blades and cowling panels arriving from several thousand feet.
There is a further point, and it is the operational one. Everything that came off those two aircraft that did not reach a village reached an airfield. Every uncontained engine failure on or near a runway is also a FOD event for the next aircraft to use it, and the debris field is not a bolt but a scatter of hot metal across the full width of the surface. The systems on this site were built for the object nobody noticed. They are equally the tool for confirming that a runway is clear after something like this, and that is a use case no vendor markets.
Sources (AeroInside, FlightGlobal)