A cargo container goes into a 787 engine at O’Hare
An American Airlines Boeing 787-9, registration N834AA, had just arrived at Chicago O’Hare from London Heathrow and was taxiing in when a cargo container was blown into its number two engine by the jetblast of a departing Air France A350. The engine was destroyed. Shrapnel from the container damaged the airframe. Nobody was hurt.
The container had come off a ground-handling trailer transiting between Terminals 5 and 3, crossing taxiways Alpha and Bravo. It was loose on the manoeuvring area for a period nobody has quantified before a departing widebody supplied the energy to move it.
The FAA and the Chicago Department of Aviation are investigating.
This is a textbook FOD chain and every link in it is ordinary. A unit load device, inadequately secured, on a vehicle making a routine crossing. No malice, no exotic failure, no weather. The only unusual element is the size of the object, and size is what makes this instructive rather than merely expensive: a ULD is not a bolt. It is a metre-plus of aluminium box, in daylight, on a taxiway at a major hub.
It was still there long enough for a jet blast to find it.
Which is the uncomfortable part. If an object that large can lie undetected on a taxiway at O’Hare, the notion that visual vigilance covers the manoeuvring area does not survive contact with the evidence. And O’Hare, like every airport this site has covered, has no automated detection anywhere — the two US installations are Boston Logan and Seattle-Tacoma, both on runways, neither at Chicago.
Note where this happened. Not the runway. The taxiway, between an apron and a terminal, which is exactly the ground the FAA’s revised guidance started calling out eight months earlier when it extended the language from runways to “other aircraft movement areas”. Twenty years of engineering effort in this field has been aimed at the one surface where this did not occur.
Sources (Aviation24, Paddle Your Own Kanoo)