FOD moved to the apron and the sensors stayed on the runway
Airports Council International — North America has published a piece on artificial intelligence and foreign object debris that contains, almost in passing, the most important number this site has seen in years.
55% of all FOD
— is discovered in stand and apron areas. The apron accounts for around 10 per cent of total FOD-related costs, at roughly four detections per ten thousand operations.
Read the first figure against twenty years of engineering effort. Every system this site has covered — Tarsier, iFerret, FODetect, FOD Finder, DEB-RA, FODDS — watches runways. The FAA performance standard, AC 150/5220-24, specifies four categories of system and all four are described in terms of runway coverage. The majority of the debris is somewhere else.
The vendor response is arriving. ADB SAFEGATE is selling AiPRON FOD, a camera-and-radar system aimed at stands and aprons, integrated with its Safedock docking guidance so that a stand is checked for debris and the docking system readied before the aircraft arrives.
That integration is the clever part, and it is a better commercial idea than anything the runway vendors have managed. A stand check is not a safety purchase competing with resurfacing for capital; it is a step inside a turnaround process the airport is already automating, sold to an operations budget, justified on the turn rather than on an engine that might have been damaged. It is the answer to the question that has defeated this industry since 2008 — who pays — because the payer and the beneficiary are, for once, the same organisation.
The 10 per cent cost figure is the caveat, and it is a real one. Fifty-five per cent of the objects, ten per cent of the cost. Apron debris is more numerous and much less dangerous, because an aircraft on a stand is not at take-off power. Nobody should read the 55 per cent as an argument that the runway sensors were pointed at the wrong place.
But it does say something about how this problem was framed. The industry built detection for the surface where the consequence is highest and left the surface where the debris originates unwatched, and then spent two decades wondering why the runway keeps having objects on it.
Debris does not appear on runways. It arrives there. Sometimes it does not even need to.
Sources (Airports Council International – North America, ADB SAFEGATE)